QSFP Optical Transceivers
QSFP28/112G/DAC/yy/xxxx
Overview 152
Features 152
Specifications 153
Overview
Parameter Value Notes
Sales item number See variant table below
Release introduced
Weight 200 g (7.1 oz)
Temperature range 0 to 70°C (32 to 158°F)
Environmental standards
compliance
l Telcordia SR-3580 Level 3 (NEBS)
l ETSI EN 300 019-1-3 Class 3.1
Table 84: General Information — QSFP28/112G/DAC/yy/xxxx
These variants are available for the QSFP28/112G/DAC/yy/xxxx pluggable transceiver.
Pluggable Transceiver Variant Release Introduced Sales Item Number Length
QSFP28/112G/DAC/CR/0100 FSP3000R7 Release 17.1 1051002635-01 100 cm (39.4in.)
QSFP28/112G/DAC/CR/0300 1051002636-01 300 cm (118.1in.)
ADVA Optical Networking recommends that the
QSFP28/112G/DAC/CR/0100 and QSFP28/112G/DAC/CR/0300 is
used with third-party equipment. If you are using these pluggable
transceivers with the MP-2B4CT receive ports, ADVA Optical
Networking recommends that the following parameters are met:
l Input voltage range with module off: ±400mV
l Input voltage range with module on:.56 V (minimum) to 1.36 V
(maximum)
l Pluggable Transceiver Compatibility
l MTBF Hours for HDEquipment
l Handling Pluggable Transceivers
Features
l Supports one bidirectional electrical interface with four electrical lanes
l Transports one aggregate service through four electrical lanes
l Transports four services through four electrical lanes
FSP 3000R7 High-Density Subshelf Guide - R17.2 - Issue:B 152