SH12 Shelf
To provide greater flexibility, the SH12 supports four chassis grounding terminals.
Figure 4: Grounding Terminals
The chassis grounding terminals include:
l Shelf rear: one on each side (bottom part of shelf, left and right) — Normally for
installations that have space behind the shelf
l Shelf side: one on each side (bottom rear part of shelf) — Only for installations where
no space is available behind the shelf
l Grounding Cable — SH12
l General Power and Grounding Guidelines
l Electrical Safety Guidelines and Warnings
l SH12 Shelf
Shipment Contents
Each SH12 shipment consists of these components and accessories:
l SH12 shelf
l Front covers — upper and lower
l Front cover extension kit
l Mounting brackets — 19-inch installed; 23-inch and ETSI included
l Grounding cable, screws, and washers
l Air filters
l Side air covers kit
FSP 3000R7 High-Density Subshelf Guide - R17.2 - Issue:B 38