Power Cables
l Power — SH12
l Power — SH4R-2
l Power — SH4R
l Power — SH1R
l PSM-AC3
l PSM-AC4
l PSM-AC5
l PSM-AC6
l AC Power Electrical Safety Guidelines and Warnings
l Providing Power to the Shelves
Number of ACPower Cables
For redundancy, one AC power cable is required per PSM-AC3, PSM-AC4, and PSM-
AC5. For redundancy, two ACpower cables are required per PSM-AC6. The type of the
power cable depends on the region or country where the shelf is installed and the line
power voltage available at the installation site. One power cable is for the primary power
supply (Power A) and the other cable is for the backup power supply (Power B).
l Power —SH1R
l Power —SH4R
l Power — SH4R-2
l Power — SH12
l PSM-AC4
l PSM-AC5
l PSM-AC3
l PSM-AC6
l AC Power Electrical Safety Guidelines and Warnings
l Providing Power to the Shelves
FSP 3000R7 High-Density Subshelf Guide - R17.2 - Issue:B 220