Installation Overview — SH12 Shelf
Chapter 14
Installation Overview
Installation Overview — SH12 Shelf 235
Installation Overview — SH4R and SH4R-2 Shelves 237
Installation Overview — SH1R Shelf 238
Installation Overview — 1U Shelf 239
Service Personnel Assumptions 240
Adhere to the cautions and warnings throughout this document for a
safe and hazard-free installation. Personnel must understand and
apply the safety guidelines provided in this document. In addition, the
safety notices on the equipment labels should be strictly followed.
Before you start any of these procedures, read the entire section for
important information. For complete safety and compliance information,
see PART 6: SAFETY GUIDELINES.
Installation Overview — SH12 Shelf
When you install the SH12 shelf, be sure that you follow the installation procedures in the
proper sequence. This table is an installation procedure checklist, showing the
procedures in the order in which they should occur.
Before installing the equipment, be aware of important rack and
accessory installation requirements. See Supported Rack
Requirements and Accessory Installation Requirements for more
information.
Before proceeding with the installation and cabling, be aware of
standard safety practices and the hazards involved in working with
electrical circuitry to prevent accidents.
235 FSP 3000R7 High-Density Subshelf Guide - R17.2 - Issue:B
To Next Page
Loading...
