MA-2C5LT
7) is 5.0 W.
Features
l May operate as ADM, muxponder, and cross-connect
l Traffic flow: Client-to-Network, Client-to-Client, Network-to-Network
l Supports a mix of multiple services: Ethernet, OTN, SDH, Fibre Channel
l Has five client interface plugs (20 total client ports) supporting QSFP pluggable
transceivers
l Has two network interfaces that support QSFP28 pluggable transceivers
l May handover traffic to MP-2B4CT for transport
l Provides comprehensive fault and performance monitoring
l Supports facility and terminal loopbacks on interfaces
l Is field replaceable
l Interfaces
l Pluggable Transceivers
l Handling Modules
l Electrostatic Discharge Damage Prevention and Warning
Interfaces
Client Interface 118
Network Interface 120
l Overview
l Cables
l Pluggable Transceivers
Client Interface
Number of client groups 5
Number of client ports 20 (C1-C4, C5-C8, C9-C12, C13-C16, C17-C20)
Type of client interface QSFP10/QSFP28
Optical connector Depends on plug type
FSP 3000R7 High-Density Subshelf Guide - R17.2 - Issue:B 118