Adva 3000R7 - Replacing the Air Filter Pads; Required Tools and Equipment

Required Tools and Equipment
Chapter 29
Replacing the Air Filter Pads
Required Tools and Equipment 356
Replacing the SH12 Air Filter Pad 357
Replacing the SH4R and SH4R-2 Air Filter Pads 359
Replacing the SH1R Air Filter Pad 361
Replacing the PSM-AC6 Air Filter Pad 362
A dirty air filter pad negatively influences cooling efficiency. Replace
dirty air filter pads at least once a year. ADVA Optical Networking
recommends replacing the air filter pad every 90 days in
environments without air filtration.
Required Tools and Equipment
l ESD-preventive wrist strap or other personal grounding device
l Suitable grounded surface or a static-dissipative mat
l Appropriate air filter pads
l Screwdriver (0,8 mm x max. 6 mm) (for SH12)
l Torx T10 screwdriver (for SH4R, SH4R-2, and SH1R)
Use only ADVA Optical Networking original air filter pads for
replacement.
l Clearance Requirements
l Air Filter Pads
FSP 3000R7 High-Density Subshelf Guide - R17.2 - Issue:B 356