Connecting DC Power to the SH12 Shelf
The FTM-2s should start working, one after another and the Svc LED should turn
green. This also indicates that the FTMs are functioning properly. In addition, the
Mod LEDs of all modules installed in the shelf should turn green.
If the Mod LED of the PSM-DC is off, no power is being supplied to the
unit. In case of an error, the Mod LED turns red. For troubleshooting
information, see Troubleshooting with Component LEDs or contact
ADVA Optical Networking for technical assistance.
l DCPower Source Requirements
l DC Power Cable Specifications
l Shortening and Assembling DCPower Cables
l Electrical Safety Guidelines and Warnings
l In Case of Electrical Accident
FSP 3000R7 High-Density Subshelf Guide - R17.2 - Issue:B 330
To Next Page
Loading...
