Configure
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
101
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway Web GUI Users Guide
EDITING IP POLICY RULE
1. In the Policy Based Routing page, select the IP policy whose rule details are to
be edited. The rules already configured for the selected IP policy is displayed in
the PBR Policy Details table.
2. Click Edit icon in the Action column to edit the rule details.
3. Edit rule page is displayed. Make the required changes. Policy Name is not
editable.
4. Click Apply to save changes, or Cancel to retain the original settings.
D
ELETING RULE FOR A MATCH-LIST
1. In the Policy Based Routing page, select the IP policy whose rule/rules is to be
deleted. The rules already configured for the selected IP policy is displayed in the
PBR Policy Details table.
2. Click Delete icon in the Action column against the rule to be deleted.
3. Confirm at the prompt to delete the rule.
A
TTACH AN IP POLICY TO AN INTERFACE
This command is used to attach an IP policy to an interface.
Note: An interface can have only one IP policy applied on it at any time.
You cannot apply the IP policy on the interface having a Transparent Forward policy.
Remove the TF policy before configuring the IP policy.
Step 1: Attach an IP Policy to the interface in the Policy Based Routing table.
1. Select the IP policy to be attached on an interface from the Policy Name list.
2. Click Attach Interface icon. Attach Interface page is displayed:
To Next Page
Loading...
Need help?
General
