CAPINTEC, INC. CAPTUS
®
4000e
August 15 BIOASSAY 11-5
Figure 11-5
iv. Select the Start Procedure button or press Alt+S to start measurements, or
select the Exit button or press Alt+E to return to the Bioassay Setup screen
(Figure 11-2).
When the procedure is started, the program will lead you through a sequence of
measurements. Simply follow the on-screen instructions to complete the efficiency
measurement. The first screen to appear is Figure 11-6.
Figure 11-6
v. Verify that there are no radioactive sources in the area and select the OK button
to measure background counts. The Data Acquisition screen (Figure 11-7) is
displayed.
To Next Page
Loading...