ChamSys Ltd www.chamsys.co.uk
MagicQ User Manual 316 Version 1.4.9.0
This is a Window select button. Pressing this button makes the Page Window the active window. If the
window was not open, then the window is opened.
The Page Window is used to select which page of Playbacks is currently in use. Selecting of Pages can
also be done using the Page Select buttons. The Page Window also provides a means for naming Pages.
Pressing and holding the Page button causes the Page Window to be temporarily made the active window
until the button is released.
Playbacks
This is a Window select button. Pressing this button makes the Playbacks Window the active window. If
the window was not open, then the window is opened.
The Playbacks Window is used to manage the allocation of Cue Stacks to Playbacks. Cue Stacks can be
recorded, named, removed, moved, and copied between Playbacks.
Pressing and holding the Playbacks button causes the Playbacks Window to be temporarily made the
active window until the button is released.
Cue
This is a Window select button. Pressing this button makes the Cue Window the active window. If the
window was not open, then the window is opened.
The Cue Window is used to view and modify the contents of a Cue.
Also see Recording a Cue.
Pressing and holding the Cue button causes the Cue Window to be temporarily made the active window
until the button is released.
Cue Stack
This is a Window select button. Pressing this button makes the Cue Stack Window the active window. If
the window was not open, then the window is opened.
The Cue Stack Window is used to manage the steps in a Cue Stack. Steps can be recorded, named and
removed. Cue timings and settings can also be configured.
Also see recording of Cue Stacks.
Pressing and holding the Cue Stack button causes the Cue Stack Window to be temporarily made the
active window until the button is released.
Stack Store
This is a Window select button. Pressing this button makes the Stack Store Window the active window.
If the window was not open, then the window is opened.
The Stack Store Window is used to view all of the Cue Stacks stored on the console. Cue Stacks can be
recorded, named, removed, moved and copied.
Pressing and holding the Stack Store button causes the Stack Store Window to be temporarily made the
active window until the button is released.
To Next Page
Loading...
