Cisco Nexus 3000 series - Feature Scheduler

Send comments to nexus3k-docfeedback@cisco.com
-SM-79
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter System Management Commands
feature scheduler
feature scheduler
To enable the scheduler feature on a Cisco NX-OS device, use the feature scheduler command. To
disable the schedule feature, use the no form of this command.
feature scheduler
no feature scheduler
Syntax Description This command has no arguments or keywords.
Defaults Disabled
Command Modes Global configuration mode
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to enable the scheduler feature on a Cisco NX-OS device:
switch# configure terminal
switch(config)# feature scheduler
This example shows how to disable the scheduler feature on a Cisco NX-OS device:
switch(config)# no feature scheduler
switch(config)#
Related Commands
Release Modification
5.0(3)U3(1) This command was introduced.
Command Description
scheduler Configures maintenance jobs.