Cisco Nexus 3000 series - Ntp Abort

Send comments to nexus3k-docfeedback@cisco.com
-SM-129
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter System Management Commands
ntp abort
ntp abort
To discard the Network Time Protocol (NTP) configuration, use the ntp abort command.
ntp abort
Syntax Description This command has no arguments or keywords.
Command Default None
Command Modes Global configuration mode
Command History
Examples This example shows how to abort the NTP configuration:
switch# configure terminal
switch(config)# ntp abort
switch(config)#
Related Commands
Release Modification
5.0(3)U1(1) This command was introduced.
Command Description
ntp distribute Enables CFS distribution for NTP.
show ntp Displays NTP information.
ntp commit Commits the NTP configuration.