Cisco Nexus 3000 series - Show Running-Config Callhome

Send comments to nexus3k-docfeedback@cisco.com
-SM-265
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter System Management Commands
show running-config callhome
show running-config callhome
To display the Call Home running configuration, use the show running-config callhome command.
show running-config callhome [all]
Syntax Description
Command Default Displays only the configured information.
Command Modes EXEC mode
Command History
Examples This example shows how to display the Call Home running configuration:
switch# show running-config callhome
This example shows how to display the entire Call Home running configuration, including the default
values:
switch# show running-config callhome all
Related Commands
all (Optional) Displays all the default and configured information.
Release Modification
5.0(3)U1(1) This command was introduced.
Command Description
show callhome Displays Call Home configuration information.