Cisco Nexus 3000 series - Event Manager Policy

To Next Page

To Previous Page

Send comments to nexus3k-docfeedback@cisco.com

-SM-61

Cisco Nexus 3000 Series NX-OS System Management Command Reference

OL-29557-04

Chapter System Management Commands

event manager policy

To register and activate an Embedded Event Manager (EEM) script policy, use the event manager policy

command. To remove the event manager policy, use the no form of this command.

event manager policy policy-script-file

no event track event manager policy script-policy-file

Syntax Description

Defaults None

Command Modes Global configuration mode

Command History

Usage Guidelines Before using the event manager policy command, define a policy by using the virtual shell (VSH) script

and copy the file to the system directory. For information on how to define a policy, see the Cisco Nexus

3000 Series NX-OS System Management Configuration Guide.

This command does not require a license.

Examples This example shows how to register and activate an EEM script policy:

switch# configure terminal

switch(config)# event manager policy modulescript

switch(config)#

policy-script-file Name of the script policy file. The policy scriptfile name can be any

case-sensitive, alphanumeric string up to 29 characters.

Release Modification

5.0(3)U3(1) This command was introduced.

Other manuals for Cisco Nexus 3000 series