Cisco Nexus 3000 series - Logging Abort

Send comments to nexus3k-docfeedback@cisco.com
-SM-98
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter System Management Commands
logging abort
logging abort
To discard the pending changes to the syslog server configuration, use the logging abort command.
logging abort
Syntax Description This command has no arguments or keywords.
Command Default None
Command Modes Global configuration mode
Command History
Examples This example shows how to discard the changes made to the syslog server configuration:
switch# configure terminal
switch(config)# logging distribute
switch(config)# logging abort
switch(config)#
Related Commands
Release Modification
5.0(3)U1(1) This command was introduced.
Command Description
logging distribute Enables the distribution of the syslog server configuration to network
switches using the CFS infrastructure.
show logging pending Displays the pending changes to the syslog server configuration.
show logging status Displays the logging status.