Send comments to nexus3k-docfeedback@cisco.com
-SM-286
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter System Management Commands
show snmp user
show snmp user
To display information on each Simple Network Management Protocol (SNMP) user, use the show snmp
user command.
show snmp user
Syntax Description This command has no arguments or keywords.
Command Default None
Command Modes EXEC mode
Command History
Examples This example shows how to display the SNMP users configured on the switch:
switch# show snmp user
This example shows how to display information about a specific SNMP user:
switch# show snmp user admin
Related Commands
Release Modification
5.0(3)U1(1) This command was introduced.
Command Description
snmp-server user Configures a new user to an SNMP group.
To Next Page
Loading...
