Send comments to nexus3k-docfeedback@cisco.com
-SM-280
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter System Management Commands
show snmp context
show snmp context
To display the Simple Network Management Protocol (SNMP) contexts configured on the switch, use
the show snmp context command.
show snmp context
Syntax Description This command has no arguments or keywords.
Command Default None
Command Modes EXEC mode
Command History
Examples This example shows how to display the SNMP contexts:
switch# show snmp context
Related Commands
Release Modification
5.0(3)U1(1) This command was introduced.
Command Description
snmp-server context Configures an SNMP context.
To Next Page
Loading...
