Cisco Nexus 3000 series - Show Ntp Peer-Status

Send comments to nexus3k-docfeedback@cisco.com
-SM-240
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter System Management Commands
show ntp peer-status
show ntp peer-status
To display the status of the Network Time Protocol (NTP) peers, use the show ntp peer-status
command.
show ntp peer-status
Syntax Description This command has no arguments or keywords.
Command Default None
Command Modes EXEC mode
Command History
Examples This example shows how to display the peer status for NTP:
switch# show ntp peer-status
Related Commands
Release Modification
6.0(2)U2(1) This command was introduced.
Command Description
show ntp peers Displays information about NTP peers.