Cisco Nexus 3000 series - Mpls Strip Label-Age

Send comments to nexus3k-docfeedback@cisco.com
-SM-126
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter System Management Commands
mpls strip label-age
mpls strip label-age
To define the amount of time after which dynamic MPLS labels age out, use the mpls strip label-age
command. To delete the defined age, use the no form of this command.
mpls strip label-age age
no mpls strip label-age age
Syntax Description
Command Default None
Command Modes Global configuration mode
Command History
Examples This example shows how to configure label age for dynamic MPLS labels:
switch# configure terminal
switch(config)# mpls strip label-age 300
switch(config)#
Related Commands
age Specifies the amount of time after which dynamic MPLS labels age out. The
value of the age can range from 1 to 10000000 seconds.
The default age is 1800 seconds.
Release Modification
6.0(2)U2(5) This command was introduced.
Command Description
mpls strip Enables the MPLS stripping feature.
clear mpls strip label
dynamic
Clears dynamic label entries.
mpls strip label Adds or deletes static MPLS labels.
mpls strip dest-mac Configures the destination MAC address for stripped egress frames.
show mpls strip labels Displays MPLS label configuration.