Send comments to nexus3k-docfeedback@cisco.com
-23
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter New and Changed Information
System Management You can use the system management
commands to enable logging messages,
configure a remote syslog server, or verify a
session configuration.
5.0(3)U1(1) abort (session)
clear counters mpls strip
clear logging nvram
clear logging onboard
clear logging session
clear mpls strip label dynamic
clear ntp statistics
commit (session)
diagnostic bootup level
ip access-list (session)
ip port access-group (session)
logging abort
logging commit
logging console
logging distribute
logging event
logging event port
logging logfile
logging module
logging monitor
logging server
logging timestamp
show diagnostic bootup level
show diagnostic result
show hardware forwarding memory
health summary
show logging console
show logging info
show logging last
show logging level
show logging logfile
show logging module
show logging monitor
show logging nvram
Table 1 New and Changed Information
Feature Description
Changed in
Release Where Documented
To Next Page
Loading...
