Cisco Nexus 3000 series - Show Snmp Group

Send comments to nexus3k-docfeedback@cisco.com
-SM-282
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter System Management Commands
show snmp group
show snmp group
To display the names of the Simple Network Management Protocol (SNMP) groups configured on the
switch, use the show snmp group command.
show snmp group
Syntax Description This command has no arguments or keywords.
Command Default None
Command Modes EXEC mode
Command History
Examples This example shows how to display the SNMP groups:
switch# show snmp group
Related Commands
Release Modification
5.0(3)U1(1) This command was introduced.
Command Description
show running-config Displays the running system configuration information.