Cisco Nexus 3000 series - Show Running-Config Exclude-Provision

Send comments to nexus3k-docfeedback@cisco.com
-SM-268
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter System Management Commands
show running-config exclude-provision
show running-config exclude-provision
To display the running configuration without the configuration for offline preprovisioned interfaces, use
the show running-config exclude-provision command.
show running-config exclude-provision
Syntax Description This command has no arguments or keywords.
Command Default None
Command Modes EXEC mode
Command History
Examples This example shows how to display the running configuration without the offline preprovisioned
interfaces:
switch# show running-config exclude-provision
!Command: show running-config exclude-provision
!Time: Fri May 28 10:35:32 2010
version 5.0(3)U1(1)
feature telnet
feature private-vlan
username adminbackup password 5 ! role network-operator
username admin password 5 $1$gLP0Z4.z$nA4fMnTcHmdSgQ3ENakm/1 role network-admin
ip domain-lookup
hostname switch
slot 1
snmp-server user admin network-admin auth md5 0xd727e3e4ed39de2f32841ffa24e4234c
priv 0xd727e3e4ed39de2f32841ffa24e4234c localizedkey
vrf context management
ip route 0.0.0.0/0 192.168.0.1
vlan 1
vlan 5
private-vlan primary
port-channel load-balance ethernet source-ip
interface Ethernet1/1
<--Output truncated-->
switch#
Release Modification
5.0(3)U1(1) This command was introduced.