Cisco Nexus 3000 series - Ip Domain-List

Send comments to nexus3k-docfeedback@cisco.com
-SM-89
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter System Management Commands
ip domain-list
ip domain-list
To configure the IP domain list, use the ip domain-list command. To disable the IP domain list, use the
no form of the command.
ip domain-list domain-name [use-vrf name]
no ip domain-list domain-name [use-vrf name]
Syntax Description
Command Default None
Command Modes Global configuration mode
VRF context configuration mode
Command History
Usage Guidelines Use the ip domain-list command to configure additional domain names for the device. Use the vrf
context command to enter the VRF context mode to configure additional domain names for a particular
VRF.
Examples This example shows how to configure the IP domain list for the default VRF:
switch# configure terminal
switch(config)# ip domain-list Mysite.com
switch(config)#
This example shows how to configure the IP domain list for the management VRF:
switch# configure terminal
switch(config)# vrf context management
switch(config-vrf)# ip domain-list Mysite.com
switch(config-vrf)#
This example shows how to configure the IP domain list for the default VRF to use the management VRF
as a backup if the domain name cannot be resolved through the default VRF:
switch# configure terminal
switch(config)# vrf context management
switch(config-vrf)# exit
switch(config)# ip domain-name Mysite.com use-vrf management
domain-name Domain name for the IP domain list. The name can be any case-sensitive,
alphanumeric string up to 63 characters.
use-vrf name (Optional) Specifies the virtual routing and forwarding (VRF) to use to
resolve the domain domain name for the IP domain list. The name can be any
case-sensitive, alphanumeric string up to 32 characters.
Release Modification
5.0(3)U1(1) This command was introduced.