Send comments to nexus3k-docfeedback@cisco.com
-SM-175
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter System Management Commands
rmon hcalarm
rmon hcalarm
To configure a high-capacity Remote Monitoring (RMON) alarm, use the rmon hcalarm command. To
remove a high-capacity RMON alarm, use the no form of this command.
rmon hcalarm alarm-no MIB-obj sample-interval {absolute | delta} startupalarm
startup-alarm-type rising-threshold rising-threshold-value event-index falling-threshold
fall-threshold-value [event-index] [owner name]
no rmon hcalarm alarm-no MIB-obj sample-interval {absolute | delta} startupalarm
startup-alarm-type rising-threshold rising-threshold-value event-index falling-threshold
fall-threshold-value [event-index] [owner name]
Syntax Description
Command Default None
Command Modes Global configuration mode
Command History
alarm-no Alarm number. The range is from 1 to 65535.
MIB-obj MIB object to monitor.
The MIB object must be an existing SNMP MIB object in standard dot
notation; for example, 1.3.6.1.2.1.2.2.1.17.83886080.
sample-interval Sample interval at which the switch collects a sample value of the MIB
object. The range is from 1 to 700000 seconds.
absolute Specifies the sample type as absolute.
delta Specifies the sample type as delta.
startupalarm Configures the startup alarm type.
startup-alarm-type Startup alarm type. The range is from 1 to 3, where 1 is rising, 2 is falling,
and 3 is rising or falling.
rising-threshold Configures the rising threshold value at which the switch triggers a rising
alarm or resets a falling alarm.
rising-threshold-value Rising threshold value. The range is from 0 to 18446744073709551615.
event-index
Event or action that the switch takes when an alarm, rising or falling,
triggers. The event index range is from 0 to 65535.
falling-threshold Configures the falling threshold value at which the switch triggers a falling
alarm or resets a rising alarm.
fall-threshold-value Falling threshold value. The range is from 0 to 18446744073709551615.
Note The falling threshold value must be less than the rising threshold.
owner name (Optional) Specifies an owner for the alarm. The name can be any
alphanumeric string.
Release Modification
5.0(3)U1(1) This command was introduced.
To Next Page
Loading...
