Cisco Nexus 3000 series - Ip Domain-Name

Send comments to nexus3k-docfeedback@cisco.com
-SM-92
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter System Management Commands
ip domain-name
ip domain-name
To configure a domain name, use the ip domain-name command. To delete a domain name, use the no
form of the command.
ip domain-name domain-name [use-vrf name]
no ip domain-name domain-name [use-vrf name]
Syntax Description
Command Default None
Command Modes Global configuration mode
VRF context configuration mode
Command History
Usage Guidelines Use the ip domain-name command to configure the domain name for the device. Use the vrf context
command to enter the VRF context mode to configure the domain monastery for a particular VRF.
Examples This example shows how to configure the IP domain name for the default VRF:
switch# configure terminal
switch(config)# ip domain-name Mysite.com
switch(config)#
This example shows how to configure the IP domain name for the management VRF:
switch# configure terminal
switch(config)# vrf context management
switch(config-vrf)# ip domain-name Mysite.com
switch(config-vrf)#
This example shows how to configure the IP domain name for the default VRF to use the management
VRF as a backup if the domain name cannot be resolved through the default VRF:
switch# configure terminal
switch(config)# vrf context management
switch(config-vrf)# exit
switch(config)# ip domain-name Mysite.com use-vrf management
switch(config)#
domain-name Domain name. The name can be any case-sensitive, alphanumeric string up
to 63 characters.
use-vrf name (Optional) Specifies the virtual routing and forwarding (VRF) to use to
resolve the domain name. The name can be any case-sensitive, alphanumeric
string up to 32 characters.
Release Modification
5.0(3)U1(1) This command was introduced.