Cisco Nexus 3000 series - Show Event Manager History Events

Send comments to nexus3k-docfeedback@cisco.com
-SM-200
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter System Management Commands
show event manager history events
show event manager history events
To display the history of events for all policies, use the show event manager history command.
show event manager history events {detail [maximum num-events | severity [catastrophic |
minor | moderate | severe]}
Syntax Description
Defaults None
Command Modes Any command mode
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to display the history of events for all policies:
switch# show event manager history events detail severity catastrophic
switch#
Related Commands
detail (Optional) Displays information about all the event parameters.
maximum
num-events
(Optional) Specifies the maximum number of events to be displayed. The range
is from 1 to 500.
severity (Optional) Displays the history of only those events whose severity is greater than
or equal to the specified severity.
catastrophic (Optional) Displays the history of catastrophic events.
minor (Optional) Displays the history of minor events.
moderate (Optional) Displays the history of moderate events.
severe (Optional) Displays the history of severe events.
Release Modification
5.0(3)U3(1) This command was introduced.
Command Description
show event manager
environment
Displays information about the configured environment variables.
show event manager
event-types
Displays information about the event manager event types.
show event manager
policy-state
Displays information about a system policy.