Cisco Nexus 3000 series - Show Sflow

Send comments to nexus3k-docfeedback@cisco.com
-SM-277
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter System Management Commands
show sflow
show sflow
To display information about the sFlow global configuration, use the show sflow command.
show sflow
Syntax Description This command has no arguments or keywords.
Defaults None
Command Modes Global command mode.
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to configure sFlow information:
switch(config)# feature sflow
switch(config)# sflow sampling-rate 5000
switch(config)# sflow max-sampled-size 200
switch(config)# sflow counter-poll-interval 100
switch(config)# sflow max-datagram-size 2000
switch(config)# sflow collector-ip 192.0.2. vrf management
switch(config)# sfow collector-port 7000
switch(config)# sflow agent-ip 192.0.2.3
switch(config)# sflow data-source interface ethernet 1/5
Related Commands
Release Modification
5.0(3)U4(1) This command was introduced.
Command Description
feature sflow Enables sFlow.