Cisco Nexus 3000 series - Phone-Contact (Call Home)

Send comments to nexus3k-docfeedback@cisco.com
-SM-156
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter System Management Commands
phone-contact (Call Home)
phone-contact (Call Home)
To configure the phone number for the primary person responsible for the device, use the phone-contact
command. To remove a phone contact, use the no form of this command.
phone-contact phone-no
no phone-contact
Syntax Description
Command Default None
Command Modes Callhome configuration mode
Command History
Examples This example shows how to configure a phone number for the primary person responsible for the device:
switch# configure terminal
switch(config)# callhome
switch(config-callhome)# phone-contact +1-800-123-4567
switch(config-callhome)#
Related Commands
phone-no Phone number in international phone number format, such as
+1-800-123-4567. The phone number can be a maximum of 17
alphanumeric characters and cannot contain spaces.
Note You must use the + prefix before the number.
Release Modification
5.0(3)U1(1) This command was introduced.
Command Description
copy running-config
startup-config
Saves this configuration change.
show callhome Displays a summary of the Call Home configuration.
streetaddress Configures the street address for the primary person responsible for the
switch.