Cisco Nexus 3000 series - Logging Distribute

Send comments to nexus3k-docfeedback@cisco.com
-SM-101
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter System Management Commands
logging distribute
logging distribute
To enable the distribution of the syslog server configuration to network switches using the Cisco Fabric
Services (CFS) infrastructure, use the logging distribute command. To disable the distribution, use the
no form of this command.
logging distribute
no logging distribute
Syntax Description This command has no arguments or keywords.
Command Default Distribution is disabled.
Command Modes Global configuration mode
Command History
Examples This example shows how to enable the distribution of the syslog server configuration:
switch# configure terminal
switch(config)# logging distribute
switch(config)#
This example shows how to disable the distribution of the syslog server configuration:
switch# configure terminal
switch(config)# no logging distribute
switch(config)#
Related Commands
Release Modification
5.0(3)U1(1) This command was introduced.
Command Description
logging abort Cancels the pending changes to the syslog server configuration.
logging commit Commits the changes to the syslog server configuration for distribution to
the switches in the fabric.
show logging status Displays the logging status.