Cisco Nexus 3000 series - Show Ptp Clock

Send comments to nexus3k-docfeedback@cisco.com
-SM-251
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter System Management Commands
show ptp clock
show ptp clock
To display the Precision Time Protocol (PTP) clock information, use the show ptp clock command.
show ptp clock
Syntax Description This command has no arguments or keywords.
Command Default None
Command Modes Any command mode
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to display the PTP clock information:
switch# show ptp clock
PTP Device Type: Boundary clock
Clock Identity : 54:7f:ee:ff:ff: 2:47:81
Clock Domain: 1
Number of PTP ports: 0
Priority1 : 255
Priority2 : 255
Clock Quality:
Class : 248
Accuracy : 254
Offset (log variance) : 65535
Offset From Master : 0
Mean Path Delay : 0
Steps removed : 0
Local clock time:Fri Sep 30 05:57:50 2011
switch#
Related Commands
Release Modification
5.0(3)U2(2) This command was introduced.
Command Description
show ptp brief Displays the PTP status.
show ptp clock
foreign-masters-record
Displays the state of foreign masters known to the PTP process.
show ptp corrections Displays the last few PTP corrections.
show ptp parent Displays the properties of the PTP parent.