Cisco Nexus 3000 series - Show Logging Timestamp

Send comments to nexus3k-docfeedback@cisco.com
-SM-229
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter System Management Commands
show logging timestamp
show logging timestamp
To display the logging time-stamp configuration, use the show logging timestamp command.
show logging timestamp
Syntax Description This command has no arguments or keywords.
Command Default None
Command Modes EXEC mode
Command History
Examples This example shows how to display the logging time-stamp configuration:
switch# show logging timestamp
Related Commands
Release Modification
5.0(3)U1(1) This command was introduced.
Command Description
logging timestamp Configures the logging time stamp granularity.