Cisco Nexus 3000 series - Show Logging Level

Send comments to nexus3k-docfeedback@cisco.com
-SM-214
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter System Management Commands
show logging level
show logging level
To display the facility logging severity level configuration, use the show logging level command.
show logging level [facility]
Syntax Description
Command Default None
Command Modes EXEC mode
Command History
Examples This example shows how to display the logging severity level configuration:
switch# show logging level
Facility Default Severity Current Session Severity
-------- ---------------- ------------------------
aaa 3 3
aclmgr 3 3
afm 3 3
altos 3 3
auth 0 0
authpriv 3 3
bootvar 5 5
callhome 2 2
capability 2 2
capability 2 2
cdp 2 2
cert_enroll 2 2
cfs 3 3
:
<--snip-->
:
vdc_mgr 6 6
vlan_mgr 2 2
vmm 5 5
vshd 5 5
xmlma 3 3
zschk 2 2
0(emergencies) 1(alerts) 2(critical)
3(errors) 4(warnings) 5(notifications)
6(information) 7(debugging)
switch#
This example shows how to display the EtherChannel logging severity level configuration:
facility (Optional) Logging facility.
Release Modification
5.0(3)U1(1) This command was introduced.