Cisco Nexus 3000 series - Sflow Max-Sampled-Size

Send comments to nexus3k-docfeedback@cisco.com
-SM-186
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter System Management Commands
sflow max-sampled-size
sflow max-sampled-size
To configure the maximum number of bytes copied from the sampled packet, use the sflow
max-sampled-size command. To remove the maximum bytes, use the no form of this command.
sflow max-sampled-size sampling-size
no sflow max-sampled-size sampling-size
Syntax Description
Defaults None
Command Modes Global configuration
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to configure the maximum sampling size for the sFlow Agent.
switch# configure terminal
switch(config)# sflow maximum-sampled-size 200
switch(config)# copy running-config startup-config
Related Commands
sampling-size sFlow maximum sampling size packets. The range for the sampling-size
is from 64 to 256 bytes. The default value is 128.
Release Modification
5.0(3)U4(1) This command was introduced.
Command Description
feature sflow Enables sFlow.
show sflow Displays sFlow information.