Cisco Nexus 3000 series - Show Ptp Time-Property

Send comments to nexus3k-docfeedback@cisco.com
-SM-260
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter System Management Commands
show ptp time-property
show ptp time-property
To display the Precision Time Protocol (PTP) clock properties, use the show ptp time-property
command.
show ptp time-property
Syntax Description This command has no arguments or keywords.
Command Default None
Command Modes Any command mode
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to display the PTP clock properties:
switch# show ptp time-property
PTP CLOCK TIME PROPERTY:
Current UTC Offset valid: 0
Current UTC Offset: 0
Leap59: 0
Leap61: 0
Time Traceable: 0
Frequency Traceable: 0
PTP Timescale: 0
Time Source: 0xa0(Internal Oscillator)
switch#
Related Commands
Release Modification
5.0(3)U2(2) This command was introduced.
Command Description
show ptp brief Displays the PTP status.
show ptp clock Displays the properties of the local clock.
show ptp clock
foreign-masters-record
Displays the state of foreign masters known to the PTP process.
show ptp corrections Displays the last few PTP corrections.
show ptp parent Displays the properties of the PTP parent.
show ptp port Displays the status of the PTP port.