Cisco Nexus 3000 series - Show Ptp Clock Foreign-Masters-Record

Send comments to nexus3k-docfeedback@cisco.com
-SM-253
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter System Management Commands
show ptp clock foreign-masters-record
show ptp clock foreign-masters-record
To display information about the state of foreign masters known to the Precision Time Protocol (PTP)
process, use the show ptp clock foreign-masters-record command.
show ptp clock foreign-masters-record [interface ethernet slot/port]
Syntax Description
Command Default None
Command Modes Any command mode
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to display information about the state of foreign masters known to the PTP
process:
switch# show ptp clock foreign-masters-record
This example shows how to display information about the state of foreign masters known to the PTP
process for the Ethernet interface 1/5:
switch# show ptp clock foreign-masters-record interface ethernet 1/5
interface (Optional) Specifies an interface.
ethernet Specifies an IEEE 802.3z Ethernet interface.
slot/port Slot number of the Ethernet interface. The slot number is from 1 to 255 and
the port number is form 1 to 128.
Release Modification
5.0(3)U2(2) This command was introduced.