Cisco Nexus 3000 series - Callhome Test

Send comments to nexus3k-docfeedback@cisco.com
-SM-22
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter System Management Commands
callhome test
callhome test
To send a Call Home test message to all configured destinations, use the callhome test command.
callhome test [inventory]
Syntax Description
Command Default None
Command Modes EXEC mode
Command History
Examples This example shows how to send a Call Home test message to all configured destinations:
switch# callhome test
trying to send test callhome message
successfully sent test callhome message
switch#
This example shows how to send a Call Home inventory message to all configured destinations:
switch# callhome test inventory
trying to send test callhome inventory message
successfully sent test callhome inventory message
switch#
Related Commands
inventory (Optional) Specifies that a Call Home inventory message be sent for testing
the Call Home configuration.
Release Modification
5.0(3)U1(1) This command was introduced.
Command Description
show callhome Displays Call Home configuration information.
show running-config
callhome
Displays the running configuration information for Call Home.