Send comments to nexus3k-docfeedback@cisco.com
-SM-31
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter System Management Commands
clear ntp session
clear ntp session
To clear the Network Time Protocol (NTP) session, use the clear ntp session command.
clear ntp session
Syntax Description This command has no arguments or keywords.
Command Default None
Command Modes EXEC mode
Command History
Examples This example shows how to discard the NTP distribution session in progress:
switch# clear ntp session
switch#
Related Commands
Release Modification
5.0(3)U1(1) This command was introduced.
Command Description
show ntp Displays NTP information.
To Next Page
Loading...
