Send comments to nexus3k-docfeedback@cisco.com
-SM-219
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter System Management Commands
show logging nvram
show logging nvram
To display the messages in the nonvolatile random access memory (NVRAM) log, use the show logging
nvram command.
show logging nvram [last number-lines]
Syntax Description
Command Default None
Command Modes EXEC mode
Command History
Examples This example shows how to display the last 20 messages in the NVRAM log:
switch# show logging nvram last 20
Related Commands
last number-lines (Optional) Specifies the number of lines to display. The number of lines is from
1 to 100.
Release Modification
5.0(3)U1(1) This command was introduced.
Command Description
logging level Enables logging messages from a defined facility.
To Next Page
Loading...
