Send comments to nexus3k-docfeedback@cisco.com
-SM-236
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter System Management Commands
show ntp authentication-keys
show ntp authentication-keys
To display the Network Time Protocol (NTP) authentication keys, use the show ntp
authentication-keys command.
show ntp authentication-keys
Syntax Description This command has no arguments or keywords.
Defaults None
Command Modes EXEC mode
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to display the NTP authentication keys:
switch# show ntp authentication-keys
-----------------------------
Auth key MD5 String
-----------------------------
3 cisco
42 Nice_Key
34567 nexus7k
switch#
Related Commands
Release Modification
6.0(2)U(2)1 This command was introduced.
Command Description
show ntp authentica-
tion-status
Displays the status of all NTP authentication.
ntp authentication-key Configures one or more keys that a time source must provide in its NTP
packets in order for the device to synchronize to it.
To Next Page
Loading...
