Cisco Nexus 3000 series - Show Logging Module

Send comments to nexus3k-docfeedback@cisco.com
-SM-217
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter System Management Commands
show logging module
show logging module
To display the module logging configuration, use the show logging module command.
show logging module
Syntax Description This command has no arguments or keywords.
Command Default None
Command Modes EXEC mode
Command History
Examples This example shows how to display the module logging configuration:
switch# show logging module
Related Commands
Release Modification
5.0(3)U1(1) This command was introduced.
Command Description
logging module Configures module logging.