Cisco Nexus 3000 series - Snmp-Server Host

Send comments to nexus3k-docfeedback@cisco.com
-SM-310
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter System Management Commands
snmp-server host
snmp-server host
To specify the recipient of a Simple Network Management Protocol (SNMP) notification operation, use
the snmp-server host command. To remove the specified host, use the no form of this command.
snmp-server host host-address {community-string | filter-vrf {vrf-name | default | management}
| {informs | traps} {community-string | version {1 | 2c | 3 {auth | noauth | priv}}
community-string [udp-port port]} | version {1 | 2c | 3 {auth | noauth | priv}}
community-string [udp-port port]}
no snmp-server host host-address {community-string | filter-vrf {vrf-name | default |
management} | {informs | traps} {community-string | version {1 | 2c | 3 {auth | noauth |
priv}}
community-string [udp-port port]} | version {1 | 2c | 3 {auth | noauth | priv}}
community-string [udp-port port]}
Syntax Description
Command Default Disabled
host-address Name or Internet address of the host.
community-string String sent with the notification operation. The string can be a maximum of
32 alphanumeric characters.
We recommend that you define this string using the snmp-server
community command prior to using the snmp-server host command.
filter-vrf vrf-name Specifies the virtual routing and forwarding (VRF) instance. The name is
case sensitive and can be a maximum of 32 alphanumeric characters.
default Specifies the default VRF.
management Specifies the management VRF.
informs Sends SNMP informs to this host.
traps Sends SNMP traps to this host.
version Specifies the version of the SNMP used to send the traps. Version 3 is the
most secure model, because it allows packet encryption with the priv
keyword. If you use the version keyword, one of the following must be
specified:
• 1—SNMPv1.
• 2c—SNMPv2C.
• 3—SNMPv3. The following three optional keywords can follow the
version 3 keyword:
– auth—Enables Message Digest 5 (MD5) and Secure Hash
Algorithm (SHA) packet authentication
– noauth (Default)—The noAuthNoPriv security level. This is the
default if the auth, noauth, or priv keyword is not specified.
– priv—Enables Data Encryption Standard (DES) packet encryption
(also called “privacy”)
udp-port port (Optional) Specifies the UDP port of the host to use. The port range is from
0 to 65535.