Cisco Nexus 3000 series - Event Syslog

Send comments to nexus3k-docfeedback@cisco.com
-SM-70
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter System Management Commands
event syslog
event syslog
To specify an event criteria for an Embedded Event Manager (EEM) applet that is run on the basis of a
syslog, use the event syslog command. To remove the syslog event criteria, use the no form of this
command.
event syslog [occurs occurs | pattern pattern | period period | priority {alerts | critical |
debugging | emergencies | errors | informational | notifications | pattern pattern | warnings}
pattern | tag]
no event syslog [occurs occurs | pattern pattern | period period | priority {alerts | critical |
debugging | emergencies | errors | informational | notifications | pattern pattern | warnings}
pattern | tag]
Syntax Description
Defaults None
Command Modes Embedded event manager configuration mode
Command History
Usage Guidelines This command does not require a license.
occurs occurs Specifies an integer to be used for number of occurrences. The range is from 1 to
65000.
pattern pattern Specifies a regular expression to be used for matching. The pattern can be any
alphanumeric string up to 256 characters.
period period Specifies the time interval within which the events need to happen. The range is
from 0 to 4294967295.
priority Specifies the priority of the log message.
alerts Specifies the alert log message.
critical Specifies the critical log message.
debugging Specifies the debugging log message.
emergencies Specifies the emergency log message.
errors Specifies the error log message.
informational Specifies the informational log message.
notifications Specifies the notifications log message.
warnings Specifies the warning log message.
tag Identifies this specific event when multiple events are included in the policy.
Release Modification
5.0(3)U3(1) This command was introduced.