Cisco Nexus 3000 series - Contract-ID (Call Home)

Send comments to nexus3k-docfeedback@cisco.com
-SM-39
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter System Management Commands
contract-id (Call Home)
contract-id (Call Home)
To configure the optional contract number for the customer, use the contract-id command. To remove a
contract number, use the no form of this command.
contract-id contract-number
no contract-id
Syntax Description
Command Default None
Command Modes Callhome configuration mode
Command History
Usage Guidelines You can configure the customer identification information that Cisco Smart Call Home should use. The
service agreement includes the customer identification information, such as the customer ID, contract
ID, and site ID.
Examples This example shows how to configure the contract number for the customer:
switch# configure terminal
switch(config)# callhome
switch(config-callhome)# contract-id 12095134-1706
switch(config-callhome)#
Related Commands
contract-number Contract number. The contract number can be up to 255 alphanumeric
characters in free format.
Release Modification
5.0(3)U1(1) This command was introduced.
Command Description
customer-id Configures the customer number for the switch.
show callhome Displays a summary of the Call Home configuration.