Cisco Nexus 3000 series - Shut (ERSPAN)

Send comments to nexus3k-docfeedback@cisco.com
-SM-296
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter System Management Commands
shut (ERSPAN)
shut (ERSPAN)
To shut down an Encapsulated Remote Switched Port Analyzer (ERSPAN) session, use the shut
command. To enable an ERSPAN session, use the no form of this command.
shut
no shut
Syntax Description This command has no arguments or keywords.
Command Default None
Command Modes ERSPAN session configuration mode
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to shut down an ERSPAN session:
switch# configure terminal
switch(config)# monitor session 1 type erspan-source
switch(config-erspan-src)# shut
switch(config-erspan-src)#
This example shows how to enable an ERSPAN session:
switch# configure terminal
switch(config)# monitor session 1 type erspan-source
switch(config-erspan-src)# no shut
switch(config-erspan-src)#
Related Commands
Release Modification
5.0(3)U2(2) This command was introduced.
Command Description
monitor session Enters the monitor configuration mode.
show monitor session Displays the virtual SPAN or ERSPAN configuration.