Cisco Nexus 3000 series - Callhome Send Diagnostic

Send comments to nexus3k-docfeedback@cisco.com
-SM-21
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter System Management Commands
callhome send diagnostic
callhome send diagnostic
To send a specified Call Home test message to all configured destinations, use the callhome send
diagnostic command.
callhome send diagnostic
Syntax Description This command has no arguments or keywords.
Command Default None
Command Modes Callhome configuration mode
Command History
Usage Guidelines You can generate a test message to test your Call Home communications using the callhome send
diagnostic command.
Examples This example shows how to configure Call Home to send test messages to all configured destinations:
switch# configure terminal
switch(config)# callhome
switch(config-callhome)# callhome send diagnostic
switch(config-callhome)#
Related Commands
Release Modification
5.0(3)U1(1) This command was introduced.
Command Description
show callhome Displays Call Home configuration information.
show running-config
callhome
Displays the running configuration information for Call Home.