Send comments to nexus3k-docfeedback@cisco.com
-SM-139
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter System Management Commands
ntp distribute
ntp distribute
To enable configuration distribution for Network Time Protocol (NTP), use the ntp distribute
command. To disable this feature, use the no form of this command.
ntp distribute
no ntp distribute
Syntax Description This command has no arguments or keywords.
Command Default Disabled
Command Modes Global configuration mode
Command History
Examples This example shows how to distribute the active NTP configuration:
switch# configure terminal
switch(config)# ntp distribute
switch(config)#
Related Commands
Release Modification
6.0(2)U2(1) This command was introduced.
Command Description
ntp commit Commits the NTP configuration changes to the active configuration.
show ntp Displays NTP information.
To Next Page
Loading...
