Cisco Nexus 3000 series - Clear Ptp Counters

Send comments to nexus3k-docfeedback@cisco.com
-SM-33
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter System Management Commands
clear ptp counters
clear ptp counters
To clear the Precision Time Protocol (PTP) packet counters, use the clear ptp counters command.
clear ptp counters {all | interface ethernet slot/port}
Syntax Description
Command Default None
Command Modes EXEC mode
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to clear all PTP counters:
switch# clear ptp counters all
switch#
Related Commands
all Clears all PTP counters.
interface Clears PTP counters from an interface.
ethernet slot/port Clears PTP counters from an IEEE 802.3z Ethernet interface. The slot
number is from 1 to 255 and the port number is from 1 to 128.
Release Modification
5.0(3)U2(2) This command was introduced.
Command Description
feature ptp Enables PTP on the switch.
show running-config
ptp
Displays the PTP running system configuration information.