Cisco Nexus 3000 series - Site-ID (Call Home)

Send comments to nexus3k-docfeedback@cisco.com
-SM-297
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter System Management Commands
site-id (Call Home)
site-id (Call Home)
To configure the optional site number for the customer, use the site-id command. To remove a site
number, use the no form of this command.
site-id site-number
no site-id
Syntax Description
Command Default None
Command Modes Callhome configuration mode
Command History
Usage Guidelines You can configure the customer identification information that Cisco Smart Call Home should use. The
service agreement includes the customer identification information, such as the customer ID, contract
ID, and site ID.
Examples This example shows how to configure a site number:
switch# configure terminal
switch(config)# callhome
switch(config-callhome)# site-id 10020-1203
switch(config-callhome)#
Related Commands
site-number Site number. The site number can be up to 255 alphanumeric characters in
free format.
Release Modification
5.0(3)U1(1) This command was introduced.
Command Description
switch-priority Configures the switch priority for the switch.
show callhome Displays a summary of the Call Home configuration.