Cisco Nexus 3000 series - Duplicate-Message Throttle (Call Home)

Send comments to nexus3k-docfeedback@cisco.com
-SM-50
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter System Management Commands
duplicate-message throttle (Call Home)
duplicate-message throttle (Call Home)
To limit the number of duplicate messages received for the same event, use the duplicate-message
throttle command. To disable duplicate message throttling for Call Home, use the no form of this
command.
duplicate-message throttle
no duplicate-message throttle
Syntax Description This command has no arguments or keywords.
Command Default None
Command Modes Callhome configuration mode
Command History
Usage Guidelines By default, the switch limits the number of duplicate messages received for the same event. If the number
of duplicate messages sent exceeds 30 messages within a 2-hour time frame, then the switch discards
further messages for that alert type.
Examples This example shows how to enable duplicate alert message throttling for Call Home:
switch# configure terminal
switch(config)# callhome
switch(config-callhome)# duplicate-message throttle
switch(config-callhome)#
Related Commands
Release Modification
5.0(3)U1(1) This command was introduced.
Command Description
copy running-config
startup-config
Saves this configuration change.
show callhome Displays Call Home configuration information.