Cisco Nexus 3000 series - Show Logging Pending

Send comments to nexus3k-docfeedback@cisco.com
-SM-224
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter System Management Commands
show logging pending
show logging pending
To display the pending changes to the syslog server configuration, use the show logging pending
command.
show logging pending
Syntax Description This command has no arguments or keywords.
Command Default None
Command Modes EXEC mode
Command History
Examples This example shows how to display the pending changes to the syslog server configuration:
switch# show logging pending
Related Commands
Release Modification
5.0(3)U1(1) This command was introduced.
Command Description
logging abort Cancels the pending changes to the syslog server configuration.